"foobar Crash" problem was solved by newest version (ver0.64) = 2channels Stereo use only
please refer to NEW ENGLISH PAGE / 日本語の新しいページ掲載


Down load file directory


New Modules are released from Mr.Minn 1st Nov. 2009 developed and can be used on Windows Vista(Maybe Windows 7)


For foobar ver.0.96 or later modules are available , you can use WASAPI!
For 2way Channel divider module on foobar2000 ver.0.96 or later
For 3way Channel divider module on foobar2000 ver.0.96 or later
For 2way Channel divider module with Shelving Filter to compensate baffle step on foobar2000 ver.0.96 or later
Learn and simulate 2way Channel divider module with Shelving Filter(Zipped)

foobar2000.exe channel divider program

Documents for users(Japanese)

Read me document for 2way( Japanese PDF)

Read me document for 3way( Japanese PDF)

FIR filter tap and slope calculation and display demo program for 2way


Learn and simulate 2way Channel divider module with Shelving Filter(Zipped)

FIR filter tap and slope calculation and display demo program for 3way

Channel Divider dll files for foobar2000.exe ver.0.83

(Updated)Channel Divider 2way for foobar2000.exe version 0.83


(New) For 2way Channel divider module with Shelving Filter to compensate baffle step on foobar2000 ver.0.83

(Updated) Channel Divider 3way for foobar2000.exe version 0.83

Channel Divider dll files for foobar2000.exe ver.0.90 or later(See Above Newer ones are available!)

Channel Divider 2way for foobar2000.exe version 0.90 later

Channel Divider 3way for foobar2000.exe version 0.90 later

Simple check for divider modules for old version 0.83 : NOT SUPPOTRTED ,NOT OFFICIAL for test only



0. download foobar2000_special.exe from http://www.aedio.co.jp/foobar/
download MSVCR70.dll from internet. and channel divider module Channel Divider 2way for foobar2000.exe version 0.83 and Channel Divider 3way for foobar2000.exe version 0.83

1. extract and install foobar2000_special.exe
2. copy divider and MSVCR70.dll modules into \Program Files\foobar2000\components
3. run foobar2000
4. Setup by menu (Play CD option is easy to test)
5. select and load in [Preference]-[DSP]-[channeldividerF] for 2way
setup [channeldividerF] by pop-up menu
6. crossover frequency, delay of drivers and attenuation level of drivers (-3dB for woofer -9dB for tweeter for example)
7. Setup output module as directsound or appropriate one (ASIO is also available from OTA-chan ASIO driver for foobar)
8. you may specify your own 5.1ch or 7.1ch audio devices as output, connect your stereo amp to front (woofer) or read(tweeter)
then you may hear the modules is working properly

Updated Aug.29,2010 added version 0.96 or later modules explanation originally uploaded Jul.09 2006 by Y.Iida Download is free but all right are reserved by AEDIO and mr. minn